Safety data sheet

Safety data sheet for sealing and hot-glue compounds

1. Material-/ preparation- and company name

  • Product Details
  • Trade Name:
    According to Appendix
  • Use of Material / Preparation:
    Building materials, hot-workable sealing compounds, casting compounds
  • Manufacturer / Supplier:
    Villas Austria GmbH
    Industriestrasse 18
    A-9586 Fürnitz
    Tel: +43/ (0) 4257/2241-0 Fax: +43/ (0) 4257/2241-2282
  • Information: Laboratory Department, Ext.: 2243 e-mail:
  • Emergency information: Laboratory Department, Ext. 2243 (Monday to Friday: 7:30 – 16:30)

2. Possible Hazards

  • Hazard designation:  not required
  • Information pertaining to particular dangers for man and environment: not required
  • Classification System:
    The classification corresponds to the EC directives and is supplemented by data from the technical literature.

3. Composition / information on ingredients

  • Chemical characterisation
  • Description:
    Mixture of bitumen, polymers and if appropriate, inert mineral fillers.
  • Hazardous Ingredients:
    Not applicable
  • Additional Information:

4. First Aid Measures

  • General Information:
  • After inhalation:
    The products are usually processed at elevated temperature. The inhalation of the fumes should be avoided.
  • After skin contact:
    Risk of burns when dealing with hot bitumen. After skin contact with hot bitumen do not try to remove the bitumen from the skin. Immediately keep the affected body part under cold running water for at least 10 minutes. In the case of circular bitumen, which can lead to constriction, make an incision. Smaller bitumen sprays can be removed from the skin using either olive oil or paraffin oil. Immediate medical attention is a must.
  • After eye contact:
    If hot bitumen comes into the eye, cool the eye immediately with plenty of cold running water for at least 5 minutes. Get medical attention immediately. If the eye has come into contact with cold bitumen, rinse immediately with plenty of water for at least 5 minutes. If the irritation of the eye persists, consult an ophthalmologist.
  • After swallowing:
    Virtually unthinkable; The toxicity is very low.
  • Notes to physician / treatment:
    Do not attempt to remove adhesive bitumen from the skin. Once the product has cooled down, it is no longer dangerous, but provides for a sterile coverage of the burnt spots. As the healing progresses, the bitumen will dissolve automatically after a few days. If the position of the injury or the nature of the material requires the removal of the adherent bitumen, warm paraffin oil – paraffinum liquidum – may be used. A mixture of paraffin oil and kerosene is also suitable. Caution should be exercised, however, as kerosene may cause skin irritation. When using solvents, wash with water and soap or washing gels which are gentle to the skin. Then apply a suitable greasy cream or a skin cleansing cream. Use only medically approved solvents to remove bitumen from burns, as other agents may cause further damage to the skin.

5. Fire Fighting Measures

  • Suitable extinguishing agents:
    Polyvalent foam, carbon dioxide, fire extinguishing powder, water jet spray
  • Extinguishing agents which must not be used for safety reasons:
    Water with full jet; when the hot liquid bitumen gets in contact with water there is a risk of the liquid bitumen being thrown out explosively.
  • Special exposure hazards arising from the substance, its combustion products or resulting gases:
    In case of fire, the following can be released: carbon monoxide (CO)
  • Special protective equipment:
    Face, hand and heat protection recommended; Wear self-contained breathing apparatus.
  • More information:
    Fire residues must be disposed of in accordance with official regulations.

6. Accidental Release Measures

  • Security measures related to persons:
    No special actions required.
  • Environmental protection measures:
    No special actions required.
  • Methods for cleaning / absorption:
    Let solidify, remove mechanically
  • Additional information

7. Handling and Storage

  • Handling:
  • Advice for safe handling:
    No special measure required when used correctly.
  • Information about fire and explosion protection:
    No special actions required.
  • Storage:
  • Requirements for storage rooms and containers:
    No special actions required.
  • Information for combined storage:
    Not necessary
  • Further information on storage conditions:
    Protect from moisture and wet conditions, do not store in direct sunlight. Can be stored indefinitely.

8. Exposure limitation and personal protective equipment

  • Additional information on the design of technical installations:
    No further information, see section 7
  • Personal protective equipment:
  • General protective and hygienic measures:
    The usual precautions for handling hot bitumen have to be considered.
  • Hand protection:
    Protective gloves; preventive skin protection by skin ointment.
  • Eye protection:
    Safety goggles
  • Body protection:
    Protective work clothing

9. Physical and Chemical Characteristics

  • Form: solid; during processing hot liquid
  • Colour: black
  • Smell: no smell, hot liquid bituminous
  • State change
  • Melting point / Melting range: as per appendix
  • Boiling point / Boiling range:
  • Flame point: >250 °C (DIN ISO 2592)
  • Ignition temperature: >300 °C
  • Self-igniting: not self-igniting
  • Density at 20°C: as per appendix
  • Solubility in / Miscibility with water: insoluble

10. Stability and Reactivity

  • Thermal decomposition / conditions to be avoided:
    Overheating during melting.
  • Dangerous reactions:
    No dangerous reactions known.
  • Hazardous decomposition products:
    No hazardous decomposition products known when used, stored and handled correctly.

11. Toxicological information

  • Acute toxicity:
  • Primary irritation:
    • on skin: no irritant effect
    • on eye: no irritant effect
  • Additional toxicological information:
    When used appropriately, Villas casting compounds do not have any harmful effects on health according to our experience and information.

12.Ecological information

  • General information:
    No water-endangering substance in the meaning of WHG; WGK 0, generally not water-endangering (self-classification).

13. Disposal information

  • Product recommendation:
    Dispose of according to official regulations.
  • Waste code number:
    ÖNORM S2100: 54912 (bitumen, asphalt)
  • Disposal instructions:
    Thermal recovery
  • European waste catalogue:
    The allocation of the waste code numbers has to be carried out according to the EAK regulation, in line with industry and process type.
  • Uncleaned packaging:
    Recommendation: not applicable

14. Transport Information

  • Land transport ADR/RID und GGVS/GGVE (cross-border/domestic):
  • ADR/RID-GGVS/E class: –
  • Substance-number (UN-number): –
  • Sea transport IMDG/GGVSee-class:
  • IMDG/GGVSee-class: –
  • Air transport ICAO-TI and IATA-DGR:
  • ICAO/IATA-class: –
  • Transport / further information:
    No hazardous material in the sense of national and international transport regulations.


  • Labelling according to EEC directives:
    Labelling according to EC directives / GefStoffV is not necessary.
  • National provisions:
  • Water hazard calls: WGK 0, not hazardous to water (self)

16. Other information

The information contained in this safety data sheet is based on the present state of our knowledge, but does not constitute a guarantee for product properties and does not constitute a contractual legal relationship. There is no guarantee for accuracy or completeness. The user must make sure that all information is correct and complete for the respective use. Existing laws and regulations, including those not mentioned in this data sheet, are to be considered by the recipient of our products  their own responsibility.

  • Department issuing data sheet:
    Laboratory Department
  • Contact person:
    Laboratory Department, Tel.: +43/ (0) 4257/2241-2243

Safety data sheet
Joint and hot-melt adhesives